Stomp Pit Bikes 65cc-160cc
All pit bikes come with a 30 day parts only warranty.
Stomp Minipit 65 £899.00
Fully Assembled, pdi'd & Ready to zip!
- Fully auto ZS 60cc engine
- 1.5hp / 7000rpm
- Electric start
- Restricted to 20 mph
- Stealth 'quiet' exhaust system
- light-weight steel spine frame
- Conventional oil filled forks with strong steel triple clamps
- Adjustable pre-load shock
- Specially designed short length mx style swing arm
- Lightweight hubs with 10/10" alloy rims
- Quality off-road trail tyres 2.50-10
- Composite fuel tank
- New MP65 Hi impact polypropylene plastics
- 3M Stomp Race graphics with Stomp race sponsor logos
- Light-weight steel bars
- Small levers for front & rear brakes
- Cable operated disk brakes with light weight rotors
- Weight limit 9 stone
- Dry weight 42kg
- Seat height of 56cm
- Ground clearance 17cm
- lithium battery
Stomp Juicebox 3 110 Pit Bike £899.00 Fully Assembled, pdi'd & Ready to buzz!
- Bullet proof YX 110 cc semi auto 4 speed all-up gearbox
- Stealth 'quiet' exhaust system
- light-weight steel spine frame
- Conventional oil filled forks with strong steel triple clamps
- Adjustable pre-load shock
- Specially designed short length mx style swing arm
- SDG hubs with 12/10" steel rims
- Quality off-road trail tyres
- Composite fuel tank
- Hi impact polypropylene plastics
- Light-weight steel bars
- Fold back brake lever
- Hydraulic disk brakes with light weight brake discs
- Updated juicebox 3 3-m Stomp Race graphics with Stomp race sponsor logos
- Updated PRO footpegs
- Weight limit 9 stone
- Seat height of 64cm
Stomp FXJ 110 Semi Automatic Pit Bike £899.00 Fully Assembled, pdi'd & Ready to rip!
- Bullet proof YX 110cc semi automatic engine
- 19mm carb with double foam filter
- Aluminium shot blast finished cases with Stomp logo
- Stylish stealth race exhaust
- Light-weight steel spine frame
- Revised light-weight tig welded 390mm swing arm
- Conventional oil filled forks with strong steel triple clamps
- Stronger revised 280mm shock with steel bushes
- 14/12 sdg wheels with steel rims
- Superb durable and tough innova pattern mx tyres
- Improved and revised light-weight brake master cylinders and calipers
- Vented light-weight rotors 210/180mm
- Mandrill bent big bore 28mm race pipe
- Pro-taper style minibike bars
- Forged alloy clutch & brake levers
- 420 KMC chain with engraved alloy/nylon chain guide
- 420 41t lightweight durable rear sprocket
- Fold back gear selector
- NEW upgraded PRO footpegs
- NEW reinforced poly resin 5.5 ltr fuel tank
- NEW revised firmer seat with Stomp logo
- NEW Hi impact TS polypropylene plastics
- New Demon X race graphics kit with Demon X race sponsor’s logos
- Dry weight 64kg
- Seat height - 73cm
- Weight limit 15 stone
Stomp FXJ 110 Pit Bike £899.00 Fully Assembled, pdi'd & Ready to roll!
- Bullet proof YX 110cc manual engine with all-up gearbox
- 19mm carb with double foam filter
- Aluminium shot blast finished cases with Stomp logo
- Stylish stealth race exhaust
- Light-weight steel spine frame
- Revised light-weight tig welded 390mm swing arm
- Conventional oil filled forks with strong steel triple clamps
- Stronger revised 280mm shock with steel bushes
- 14/12 sdg wheels with steel rims
- Superb durable and tough innova pattern mx tyres
- Improved and revised light-weight brake master cylinders and calipers
- Vented light-weight rotors 210/180mm
- Mandrill bent big bore 28mm race pipe
- Pro-taper style minibike bars
- Forged alloy clutch & brake levers
- 420 KMC chain with engraved alloy/nylon chain guide
- 420 41t lightweight durable rear sprocket
- Fold back gear selector
- NEW upgraded PRO footpegs
- NEW reinforced poly resin 5.5 ltr fuel tank
- NEW revised firmer seat with Stomp logo
- NEW Hi impact TS polypropylene plastics
- New Stomp race graphics kit with Stomp race sponsor’s logos
- Seat height 73cm
- Dry weight 64kg
- Weight limit 15 stone
Superstomp 120R Pit Bike £999.00 Fully Assembled, pdi'd & Ready to roll!
- SR120 YX manual engine with all-up gearbox
- 8.5hp at rear wheel
- 22mm carb with double foam filter
- Aluminium shot blast finished cases with Stomp logo
- SDG2 heavy duty cradle frame for ultimate stiffness and control
- Removable rear subframe & bolt on engine hangers
- Revised light-weight tig welded 390mm swing arm
- Drop forged triple clamps (yokes)
- Stronger revised 280mm shock with steel bushes
- Extended cnc machined usd 660mm forks
- 14/12 sdg wheels with steel rims
- Superb durable and tough innova pattern mx tyres
- Improved and revised light-weight brake master cylinders and calipers
- Vented light-weight rotors 210/180mm
- Mandrill bent big bore 28mm race pipe
- Alloy thumper exhaust muffler
- Pro-taper style minibike bars
- Forged alloy clutch & brake levers
- Stomp logo cnc machined engine side cases
- 420 KMC chain with engraved alloy/nylon chain guide
- 420 41t lightweight durable rear sprocket
- Fold back gear selector
- NEW upgraded PRO footpegs
- NEW reinforced poly resin 5.5 ltr fuel tank
- NEW revised firmer seat with Stomp logo
- NEW Detroit flat panel polypropylene plastics
- New Stomp race graphics kit with Stomp race sponsor’s logos
- Seat height 75cm
- Dry weight 64kg
- Weight limit 15 stone
140-160cc
Stomp Z3-140 Pit Bike £1099.00 Fully Assembled, pdi'd & Ready to zip!
- Stomp Racing SR140C Z40 race cam
- Start-in-gear, all-up 4 speed gearbox
- 14hp at rear wheel
- 26mm race carb with double foam filter
- Aluminium shot blast finished cases with Stomp logo
- CNC oil cooler with braided steel hoses
- SDG2 heavy duty cradle frame for ultimate stiffness and control
- Removable rear subframe & bolt on engine hangers
- Revised light-weight tig welded 430mm swing arm
- Entended 735mm cnc machined usd oil filled forks
- Drop forged black anodised triple clamps (yokes)
- Nitrogen filled 290mm piggy back shock with steel bushes
- 14/12 sdg wheels with steel rims for strength
- Superb durable and tough innova pattern mx tyres
- Improved and revised light-weight brake master cylinders and calipers
- Vented light-weight rotors
- Alloy oval exhaust muffler
- Mandrill bent big bore 32mm OD race pipe
- Features full length alloy heat shield for style and protection
- Pro-taper style minibike bars
- Renthal style soft rubber grips
- Forged alloy clutch & brake levers
- 420 KMC chain with engraved alloy/nylon chain guide
- 420 41t lightweight durable rear sprocket
- 420 16t front sprocket
- Fold back gear selector
- NEW upgraded PRO footpegs
- NEW reinforced poly resin 5.5 ltr fuel tank with alloy cnc filler cap
- NEW revised firmer seat with Stomp logo
- NEW Detroit hi impact polypropylene plastics
- Wrap around crf number board with front brake pipe tidy
- New Stomp race graphics kit with Stomp race sponsor’s logos
- Seat height 82cm
- Dry weight 71kg
- Weight limit 15 stone
Stomp Z3-140 Big Wheel
Pit Bike £1199.00 Fully Assembled, pdi'd & Ready to GO!
- Stomp Racing SR140C Z40 race cam
- Start-in-gear, all-up 4 speed gearbox
- 14hp at rear wheel
- 26mm race carb with double foam filter
- Aluminium shot blast finished cases with Stomp logo
- CNC oil cooler with braided steel hoses
- SDG2 heavy duty cradle frame for ultimate stiffness and control
- Removable rear subframe & bolt on engine hangers
- Revised light-weight tig welded 430mm swing arm
- Extended 735mm cnc machined usd oil filled forks
- Drop forged black anodised triple clamps (yokes)
- Nitrogen filled 290mm piggy back shock with steel bushes
- 17/14 sdg wheels with steel rims for strength
- Superb durable and tough innova pattern mx tyres
- Improved and revised light-weight brake master cylinders and calipers
- Vented light-weight rotors
- Alloy oval exhaust muffler
- Mandrill bent big bore 32mm OD race pipe
- Features full length alloy heat shield for style and protection
- Pro-taper style minibike bars
- Renthal style soft rubber grips
- Forged alloy clutch & brake levers
- 420 KMC chain with engraved alloy/nylon chain guide
- 420 41t lightweight durable rear sprocket
- 420 16t front sprocket
- Fold back gear selector
- NEW upgraded PRO footpegs
- NEW reinforced poly resin 5.5 ltr fuel tank with alloy cnc filler cap
- NEW revised firmer seat with Stomp logo
- NEW Detroit hi impact polypropylene plastics
- Wrap around crf number board with front brake pipe tidy
- New Stomp neon yellow race graphics kit with Stomp race sponsor’s logos
- Seat height 84cm
- Dry weight 71kg
- Weight limit 15 stone
Stomp Z3R-140 Pit Bike £1399.00 Fully Assembled, pdi'd & Ready to buzz!
- Stomp Racing SR140C Z40 race cam
- Start-in-gear, all-up 4 speed gearbox
- 14hp at rear wheel
- 26mm race carb with double foam filter
- Aluminium shot blast finished cases with Stomp logo
- CNC oil cooler with braided steel hoses
- SDG2 heavy duty cradle frame for ultimate stiffness and control
- Removable rear subframe & bolt on engine hangers
- Alloy sump guard / bash plate
- 410mm alloy swing arm
- SP 735mm cnc machined usd fully adjustable oil filled forks
- Drop forged black anodised triple clamps (yokes)
- DNM nitrogen filled 290mm piggy back shock
- 14/12 sdg wheels with steel rims for strength
- rim lock in rear wheel
- Kenda tyres
- Improved and revised light-weight brake master cylinders and calipers
- Vented light-weight rotors
- Brake snake to protect the rear brake pedal
- Alloy oval exhaust muffler
- Mandrill bent big bore 32mm OD race pipe
- Features full length alloy heat shield for style and protection
- Pro-taper style minibike bars
- Renthal style soft rubber grips
- Forged alloy clutch & brake levers
- Stomp logo cnc machined engine side cases
- 420 KMC chain with engraved alloy/nylon chain guide
- 420 41t lightweight durable rear sprocket
- 420 16t front sprocket
- Fold back gear selector
- NEW upgraded PRO footpegs
- NEW reinforced poly resin 5.5 ltr fuel tank with alloy cnc filler cap
- NEW revised firmer seat with Stomp logo
- NEW Detroit hi impact polypropylene plastics
- Wrap around crf number board with front brake pipe tidy
- New Stomp race graphics kit with Stomp race sponsor’s logos
- Seat height 82cm
- Dry Weight 71kg
- Weight limit 15 stone
Stomp Z3-160 Pit Bike £1349.00 Fully Assembled, pdi'd & Ready to zip!
- Zhongshen 155cc
- Start-in-gear, all-up 4 speed gearbox
- 17hp at rear wheel
- 26mm race carb with double foam filter
- Aluminium shot blast finished cases with Stomp logo
- Race oil cooler with braided steel hoses
- SDG2 heavy duty cradle frame for ultimate stiffness and control
- Removable rear subframe & bolt on engine hangers
- Revised light-weight tig welded 430mm swing arm
- Entended 735mm cnc machined usd oil filled forks
- Drop forged black anodised triple clamps (yokes)
- Nitrogen filled 290mm piggy back shock with steel bushes
- 17/14 sdg wheels with steel rims for strength
- Superb durable and tough innova pattern mx tyres
- Improved and revised light-weight brake master cylinders and calipers
- Vented light-weight rotors
- Alloy oval exhaust muffler
- Mandrill bent big bore 32mm OD race pipe
- Features full length alloy heat shield for style and protection
- Pro-taper style minibike bars
- Renthal style soft rubber grips
- Forged alloy clutch & brake levers
- Stomp logo cnc machined engine side cases
- 420 KMC chain with engraved alloy/nylon chain guide
- 420 41t lightweight durable rear sprocket
- 420 16t front sprocket
- Fold back gear selector
- NEW upgraded PRO footpegs
- NEW reinforced poly resin 5.5 ltr fuel tank with alloy cnc filler cap
- NEW revised firmer seat with Stomp logo
- NEW Detroit hi impact polypropylene plastics
- Wrap around crf number board with front brake pipe tidy
- New Stomp race graphics kit with Stomp race sponsor’s logos
- Dry Weight 71kg
- Seat height - 84cm
- Weight limit 15 stone
A choice of three electric pit bikes
Stomp wired electric pit bike, available in green, black, blue or red £549.00. Fully Assembled, Pdi'd & ready to GO!
- Motor: 550W 24V / 36V neodymium magnet DC motor
- Battery: 36V8Ah Lithium battery
- Range: appr.35mins per charge at the use of max. speed
- Charger: included
- Transmission: ELECTRONIC CONTROLLER
- Final drive: Chain drive, front 25H11T and rear 80T
- Wheel & tires: wire spoke style, heavy duty alloy rim with 2.5-10" tire
- Max. speed: 17 mph
- Max load capacity: 65kgs
- Brake system: Front and rear mechanical disc brake
- Suspension: Front upsidedown fork, rear mono shock
- Dimension ( L* W * H): 1210* 570 * 780
- Wheelbase: 82.5cm
- Seat height: 57cm
- Min ground clearance: 22cm
- Dry weight: 30kg
- Removable battery box
- Full chain cover
- 3-speed limit system
- Lowest speed: 5 mph
- Middle speed: 10mph
- Top speed: 17 mph
Stomp Ebox 1 electric pit bike, available in green, blue or red £1349.00 Fully Assembled, Pdi'd & ready to rip!
- FRAME TYPE: Double Cradle
- FRONT WHEEL SIZE: 12"
- REAR WHEEL SIZE: 10"
- FRONT BRAKE: Hydraulic Disc
- FRONT DISC: 180mm
- REAR BRAKE: Hydraulic Disc
- REAR DISC: 180mm
- FRONT TYRE: 12" x 2.27"
- REAR TYRE: 10" x 3"
- CHAIN: 219H
- GEARING: Front 10T, Rear 70T
- MAX LOAD: 85 Kg
- SHOCK TYPE: Mono shock
- FORK TYPE: USD
- HANDLEBAR: Alloy
- MOTOR VOLTAGE: 48V
- PEAK POWER: 1.6KW (2.1hp)
- MAX rpm: 4,100
- BATTERY: 48V 15.6Ah Lithium
- CONTROLLER OUTPUT: 42A
- CHARGER: AC 110-240V, Output: 54.6V, 2A
- CHARGE TIME: 7-8 Hours
- RANGE PER CHARGE: 17 - 19 Miles
- TOP SPEED: 29 MPH
- EXTERNAL ADJUSTABILITY: Top speed, Acceleration
- FRAME CONSTRUCTION: High strength steel, powder coated, removable subframe, swing arm mounted motor, non linkage suspension
- WHEELBASE: 920mm
- GROUND CLEARANCE: 235mm
- SEAT HEIGHT: 63cm
- WEIGHT: 40.5kg
Stomp Ebox 2 electric pit bike, available in green, blue or red £1649.00 Fully Assembled, Pdi'd & ready to buzz!
- FRAME TYPE: Double Cradle
- FRONT WHEEL SIZE: 14"
- REAR WHEEL SIZE: 12"
- FRONT BRAKE: Hydraulic Disc
- FRONT DISC: 180mm
- REAR BRAKE: Hydraulic Disc
- REAR DISC: 180mm
- FRONT TYRE: 14" x 2.27"
- REAR TYRE: 12" x 3"
- CHAIN: 219H
- GEARING: Front 10T, Rear 70T
- MAX LOAD: 85 Kg
- SHOCK TYPE: Mono shock
- FORK TYPE: USD
- HANDLEBAR: Alloy
- MOTOR VOLTAGE: 60V
- PEAK POWER: 2.0KW (2.6hp)
- MAX rpm: 4,400
- BATTERY: 60V 18.2Ah Lithium
- CONTROLLER OUTPUT: 42A
- CHARGER: AC 110-240V, Output: 54.6V, 2A
- CHARGE TIME: 5-6 Hours
- RANGE PER CHARGE: 21 - 24 Miles
- TOP SPEED: 32 MPH
- EXTERNAL ADJUSTABILITY: Top speed, Acceleration
- FRAME CONSTRUCTION: High strength steel, powder coated, removable subframe, swing arm mounted motor, non-linkage suspension
- WHEELBASE: 945mm
- GROUND CLEARANCE: 275mm
- SEAT HEIGHT: 66cm
- WEIGHT: 42.5kg
© Copyright. 2022-24 All rights reserved.
We need your consent to load the translations
We use a third-party service to translate the website content that may collect data about your activity. Please review the details in the privacy policy and accept the service to view the translations.